Tripp Lite B119-003-1 Switch User Manual


  Open as PDF
of 8
 
4
2
Optional: Ifyouwishtoextendtherangeoftheincludedremote
control,connectaB119-000-RECIRReceiverUnittotheIREXT
port on the front of the switch. Locate the receiver unit in an area
whereitwillbeaccessiblewhenusingtheremotecontrol(the
B119-000-RECis5ft.inlength).
3
ConnectanHDMIsourcedevicetoanInputportontheswitch.
Note: The length of the HDMI cable connecting the source to the
switch must not exceed 13 ft. (4 m.)
4
Repeatstep2toconnectsourcedevicestotheremainingInput
ports on the switch.
5
ConnecttheOutputportontheswitchtotheHDMIInputportof
your display. Note: The length of the HDMI cable connecting the
switch to the display must not exceed 16 ft. (5 m.)
6
Connecttheincludedpowersupplytotheswitch,andthenplugit
intoaTrippLiteSurgeSuppressor,PowerDistributionUnit(PDU),or
UninterruptiblePowerSupply(UPS).
7
TurnonthepowertotheHDMIsourcedevicesanddisplay.
8
Switchbetweensourcedevicesviapushbuttonortheincluded
remote control.
Installation Instructions
13-08-229-9332C5.indd 4 8/26/2013 11:07:29 AM
 previous next