Filter
Top Products
3
Quick Installation
1
Plug the UPS into an outlet.
NOTE! after you plug the UPS into a live AC
outlet, the UPS will turn ON automatically.
See “ON/OFF” Button description in the
Basic Operation section if you want to
place the UPS in any mode other than ON.
Note: UPS system will function properly upon initial
startup; however, maximum runtime for the unit’s
battery will only be accessible after it has been charged
for 24 hours.
2
Plug your equipment into the
UPS.
The
A
outlets will provide battery backup
and surge protection; plug your computer,
monitor and other critical devices here.* The
B
outlets will provide surge protection only;
plug your printer and other non-essential
devices here.
* Your UPS is designed to only support computer
equipment. You will overload the UPS if the total VA
ratings for all the equipment you connect to the (A)
outlets exceeds the UPS’s Output Capacity (see
Specifications). To find your equipment’s VA ratings,
look on their nameplates. If the equipment is listed in
amps, multiply the number of amps by 120 to determine
VA. (Example: 1 amp × 120 = 120 VA). If you are
unsure if you have overloaded the (A) outlets, run a
self-test (see “MUTE/TEST” Button description).
NORM DELAY
1
2
A
A
B
NORM DELAY
2
A
A
B
OMNIVS1500XL shown
OMNIVS1000 shown
NORM DELAY
2
A
A
B
OMNIVS800 shown
200912037 93-2248.indd 3 12/17/2009 11:05:58 AM