Filter
Top Products
4
These connections are optional. Your UPS will function properly without these connections.
Phone Line or Phone/Network
Line Surge Suppression
(Select models only)
Your UPS has jacks which protect against
surges on a phone line or data line (depending
on model). Using telephone or network cords
connect your wall jack to the UPS jack marked
“IN.” Connect your equipment to the UPS jack
marked “OUT.” Make sure the equipment you
connect to the UPS’s jacks is also protected
against surges on the AC line.
USB Communications
Use any USB cable to connect the USB port of
your computer to the USB port of your UPS.
Download the PowerAlert UPS monitoring
software program appropriate for your operat-
ing system from www.tripplite.com and install
it on your computer.
External Battery Connection
(Select models only)
All UPS models come with a robust internal
battery system; select models feature connectors
that accept an optional external battery pack
(sold separately from Tripp Lite*) to provide
additional runtime. Adding an external battery
will increase recharge time as well as runtime.
See battery pack owner's manual for complete
installation instructions. Make sure cables are
fully inserted into their connectors. Small
sparks may result during battery connection; this
is normal. Do not connect or disconnect battery
pack when the UPS is running on battery power.
*See Specifications section for battery pack available for
your specific UPS model.
2
1
Quick Installation
optional
NORM DELAY
1
NORM DELAY
2
NORM DELAY
3
3
Shown: OMNIVSINT1000
Shown: OMNIVSINT1000
Shown: OMNIVSINT1500XL
200404081 932242 OmniVSINT800_1000_ 1500XL Owners Manual .qxd 6/8/2004 11:36 AM Page 4