Filter
Top Products
2
1. Important Safety Instructions
2. Parts and Features
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the
installation of the product described in this manual. Read ALL instructions before
attempting to install this product. Failure to comply may invalidate any warranty
and cause serious property damage and/or personal injury.
The PSCLAMP mounting kit includes:
• 2 Clamps
• 2 Cord Wraps
• 1 Drip Shield
• 5 Screws
• (3) M4 6 mm Pan Head Machine
Screws with Lockwashers for Power
Strip and Drip Shield
• (2) M6 12 mm Socket Head Cap
Screws for Cord Wraps
The PSCLAMP is designed to be used
with Tripp Lite’s Medical-Grade Power
Strips. To accommodate a wide variety
of applications, the clamps include
small-tube adapters
A
that allow them
to t tubes from ¾” up to 2 ¼”.
The clamps also include lock nuts
B
that can be tightened depending on
mounting location and equipment.
• For units meeting UL1363a
standards, the lock nuts MUST be
tightened and secure when mounting
on mobile cart, IV pole or other
certied usages.
Tripp Lite Models: PS-410-HGOEMCC,
PS-415-HG-OEM and
PS-615-HG-OEM.
• For units meeting UL 60601-1
standards, the lock nuts MAY be
tightened to user preference.
Tripp Lite Models: PS-415-HGULTRA
and SPS415HGULTRA.
Clamps
Cord Wraps Drip Shield
M6 12 mm Socket Head
Cap Screws
M4 6 mm Pan Head
Machine Screws with
Lockwashers
A
B
201205001_M-93-3155.indb 2 5/4/2012 10:05:35 AM