Filter
Top Products
3
3. Installation
Before beginning installation, verify that all necessary package contents are present
and that the power strip to be mounted conforms to the standards necessitated by
its mounting location.
1
Secure clamps
A
loosely to each
end of the power strip
B
using two
of the M4 screws provided.
Note: If attaching drip shield in next step,
mount power strip with power cord down
according to the diagram.
2
Depending on your application and
mounting location, you may wish to
attach the drip shield
C
to the top
clamp. Secure the drip shield using
one M4 screw. To ensure proper t,
the top edge of the drip shield will
rest on top of the clamp.
Note: Attaching the drip shield is optional.
3
Attach the cord wraps
D
to the
clamps using the provided M6
screws. Make sure that the arms
face away from the power strip.
1
2
3
B
A
C
D
201205001_M-93-3155.indb 3 5/4/2012 10:05:37 AM