Filter
Top Products
9
Hospital Grade AC Receptacles: The receptacles provide your con-
nected equipment with AC line power during normal operation and
battery power during blackouts and brownouts. They also protect your
equipment against damaging surges and line noise.
Tel/DSL Protection Jacks (Select Models Only): These jacks protect
connected equipment against surges travelling over the modem/fax or
telephone line. Connecting your equipment to these jacks is optional.
Your UPS will still work properly without this connection.
DB9 Port (Select Models Only): The DB9 port connects your UPS to
any workstation or server. Use with Tripp Lite’s PowerAlert UPS
monitoring software and a DB9 cable to enable your computer to
automatically save open files and shut down equipment during a
blackout. The UPS can also report power availability and UPS status,
and select UPS models have other capabilities. Consult your
PowerAlert manual for more information.
USB Port (Select Models Only): The USB port connects your UPS
to any workstation or server. Use with Tripp Lite’s PowerAlert UPS
monitoring software and an USB cable to enable your computer to
automatically save open files and shut down equipment during a
blackout. The UPS can also report power availability and UPS status,
and select UPS models have other capabilities. Consult your
PowerAlert manual for more information.
Battery Replacement Door: Under normal conditions, the original
battery in your UPS will last several years. Refer to “Battery
Warnings” in the Safety section on page 2.
External Battery Connector (Select Models Only): Use to connect
one or more Tripp Lite battery packs for additional runtime. Refer to
Specifications and/or the label next to the connector to determine the
appropriate variety of battery pack to use. Refer to the battery pack
instruction manual for complete installation information and important
safety warnings.
Input Breaker (Select Models Only): Protects your electrical circuit
from overcurrent draw from the UPS load. If this breaker trips,
remove some of the load, then reset it by pressing the breaker in.
Equipotential Connection (Select Models Only): Use this to connect
any equipment that requires a chassis ground.
Other UPS Features
Basic Operation
continued