Tripp Lite SMART5000RT3U Power Supply User Manual


 
Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power
Dual voltage output is simultaneously compatible with both 208V and 120V equipment
14 total outlets (120V: 10 x 5-15R, 2 x 5-20R/208V: 1 x L6-30R, 1 x L14-30R)
Diagnostic LEDs provide visual indication of 17 separate performance conditions
Included PowerAlert Software provides e-mail notification of power problems and simultaneous automatic unattended shutdown of multiple
servers
4 built-in communications ports (2 x DB9, 2 x USB) for remote monitoring and unattended shutdown
Slot for SNMP/web card SNMPWEBCARD and environmental sensor ENVIROSENSE for remote communications in large IP environments
8 customized load management receptacles can be individually powered off and back on again via software interface to reboot remote
equipment or perform "load shedding" of less critical loads to extend battery runtime for the most critical equipment
Emergency Power Off (EPO) interface for emergency shutoff in large facilities
Hot-swappable/user replaceable batteries allow on-site battery replacement through the front panel without powering off connected
equipment or removing the UPS from the rack
UPS battery set ships fully assembled and ready for connection to the power module, no time consuming, connection of individual internal
batteries by user is necessary
$250,000 Ultimate Lifetime Insurance (USA & Canada Only). No warranty cards required for coverage!
NAFTA compliant
2-year manufacturer's product warranty
Specifications
SYSTEM OVERVIEW
Voltage
compatibility
208V AC
Frequency
compatibility
60 Hz
OUTPUT
Output VA 5000
Output watts 4000
Output nominal
voltage
208/120V AC
Output voltage
regulation
LINE MODE: Sine wave line voltage 208V (-10% +20%) plus 120V nominal
BATTERY MODE: Sine wave output within +/-5% of 208V / 120V nominal
Output frequency
regulation
LINE MODE: Passes line frequency of 60Hz +/-10%
BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
Outlet quantity /
type
10 x NEMA 5-15R, 2 x NEMA 5-20R, 1 x NEMA L6-30R, 1 x NEMA L14-30R
Customized load
management
receptacles
"8 individually controllable outlets support load shedding and remote reboot on demand of locked network devices.
Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for servers and
other critical devices. "
Overload
protection
Resettable circuit breaker (3 total, 15A each)
INPUT
Maximum input
amps
4560 watts
Input connection
type
NEMA L6-30P
Input cord length 10 ft., 10 gauge
Recommended
Electrical Service
30A 208V
BATTERY
Full load runtime 16 min. (5000VA), add 1 BP48V60RT3U for 38 min.
Half load runtime 38 min. (2500VA), add 1 BP48V60RT3U for 86 min.
Expandable
battery runtime
Supports extended runtime with optional external battery packs BP48V242U (limit 1) and BP48V60RT3U (multi-pack
compatible)