Tripp Lite SMX700HG Power Supply User Manual


 
Resistant to electrostatic discharge
Supports loads up to 700VA/450 watts
36 minutes half load runtime (with 350VA load), 14.5 minutes full load runtime (with 700VA load)
6 protected hospital-grade outlets; IEC C14 inlet on 6-inch dongle
RS-232 and USB monitoring ports for remote monitoring and unattended shutdown
PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included)
Complete surge protection, line isolation and EMI/RFI noise filtering
2 year product warranty
5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
Battery replacement door
Grounding lug
Specifications
SYSTEM OVERVIEW
Voltage compatibility 230V AC
Frequency
compatibility
50/60 Hz (auto-select)
OUTPUT
Output VA 700
Output watts 450
Output nominal
voltage
230V AC
Output voltage
regulation
LINE MODE: Sine wave line voltage 230V (-18% / +8%)
BATTERY MODE: PWM sine wave output 230V +/-5%
Output frequency
regulation
LINE MODE: Passes line frequency of 50Hz +/-10%
BATTERY MODE: Inverter output regulated to 50/60Hz +/-0.5Hz
Outlet quantity / type 6 IEC C13
Overload protection Resettable circuit breakers
INPUT
Maximum input amps 3.6A / 828 watts
Input connection type IEC C14 inlet
Input cord length 6 inch dongle., 16 gauge
Recommended
Electrical Service
10A 230V
BATTERY
Full load runtime 14.5 minutes (700VA)
Half load runtime 36 minutes (350VA)
DC system voltage 36V DC
Typical battery
lifespan
3-6 years, depending on usage
Battery recharge rate 2-4 hours to 90%
VOLTAGE REGULATION
Voltage regulation
description
Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to
maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274V
AC
Overvoltage
correction
Input voltages between 206 and 245V AC are reduced by 9%
Direct pass through Input voltages between 200 and 244V AC are passed through unchanged
Brownout correction Input voltages between 183 and 199V AC are boosted by 10%