Filter
Top Products
4
2
1
Connection & Start-Up
Plug your UPS's Line
Cord into an electrical
outlet.
If your model features a detachable line cord,
first plug the female end into your UPS’s AC
Input Receptacle.
Your UPS must be connected to a dedicated
circuit of sufficient amperage—check the
“Recommended Utility Amps” rating of your
model in the specifications. Note, however,
that the select models may be fitted with differ-
ent plug types. Refer to the “OP Rating/Plug
Rating” chart printed on the top of your UPS.
Once your UPS is plugged in, the fan and all
Indicator Lights will turn ON. The “LINE” and
“LOAD ACTIVE METER” LEDs will illuminate
and the UPS will emit a beep to indicate nor-
mal operation. However, power is not supplied
to your UPS's AC outlets until the UPS is turned
on.
Plug your equipment into
your UPS.
Your UPS is designed to support computer
equipment only.You will overload your UPS if
you connect household appliances or laser
printers to the UPS's outlets.
Turn your UPS ON:
• Press the “ON/TEST”
Switch
• Hold it for several
seconds until you
hear a beep
• Release it
Your UPS will begin providing AC power to its
outlets. The "ON LINE" LED will illuminate.
3
SU2200RT2U Plug (NEMA 5-20) Shown
SU2200RT2U Shown