Filter
Top Products
Rear Panel
Accessory Slot: Remove the small cover panel from this slot to use
optional accessories to remotely monitor and control your UPS.
Contact Tripp Lite Customer Support at (773) 869-1234 for more
information, including a list of available SNMP, network management
and connectivity products.
“SMAR
T” Serial Port: This serial port connects your UPS to any work-
station or server. Use with Tripp Lite software and cabling to monitor
and manage network power and automatically save open files and shut
down equipment during a blackout. The port uses RS-232 communi-
cations to transmit UPS and power conditions. Contact Tripp Lite
Customer Support at (773) 869-1234 for more information, including
a list of available SNMP, network management and connectivity prod-
ucts.
External Batter
y Pack Connector: Use to connect optional Tripp Lite
Battery Packs for additional runtime. Contact Tripp Lite Customer
Support at (773) 869-1234 for the appropriate Tripp Lite battery pack
to connect. Refer to instructions available with the Battery Pack for
complete connection information and safety warnings.
F
an: The fan cools the UPS’s internal components. It is always on when
line power is present.
TVSS Co
ver Plate (Reserved for future use): Optional modem/network
surge protection modules may be available for purchase by special
arrangement with Tripp Lite.
Input Circuit Breaker Switch: This resettable breaker prevents high
input current from damaging the UPS or the attached load. If this
breaker trips, make sure your UPS is connected to AC power of the
proper voltage before resetting the circuit breaker by pushing the
breaker switch in.
Input Receptac
le (Select Models Only): Connect one end of the detach-
able line cord into this receptacle and the other into your wall outlet.
8