Tripp Lite SU10KRT3 Power Supply User Manual


  Open as PDF
of 21
 
10
1
2
3
4
5
C2
C1
5 – Wiring continued
5-5 External Battery Pack Connection
• Warning:DonotattempttoconnectordisconnectanexternalbatterypackwhentheUPSsystemisoperatingfromthebatterysupply.
• Warning:Keeptherearpaneloftheexternalbatterypackatleast20cmawayfromthewalloranyobjectthatmayimpedeairflow.
(Therearofthepowermodulemustbeatleast30cmawayfromthewall.)
• Warning:EachUPSsystemconnectedinaparallelredundancyconfigurationmusthavethesamenumberandtypeofexternal
battery packs.
• TheexternalbatterypackisrequiredtooperatetheUPSsystem.
1
Switchtheexternalbatterypack’sDCbreakertotheOFFposition.
2
RemovetheterminalcoversfromtheUPSpowermodule’sexternalbatterypackDCcableconnectorandtheexternalbatterypack’sUPS
powermoduleDCcableconnector.Retainthescrewsremovedfromtheterminalcovers.
3
ConnectoneendoftheDCcable
C2
toeachoftheDCterminalsexposedinthepreviousstep.Usethescrewsyouremovedintheprevious
steptoconnectaDCcablebracket
C1
toeachendoftheDCcable,securingittoeachrearpanel.
4
Additional external battery packs, sold separately, may be connected to the UPS system for additional battery backup runtime.
Contact Tripp Lite customer service to order additional external battery packs.
5
Switchtheexternalbatterypack’sDCbreakertotheONposition.
 previous next