Tripp Lite SU10KRT3 Power Supply User Manual


  Open as PDF
of 21
 
15
Q1
Z
V3
BB
S2
AA
R1
Q2 V4
U
T
R2 V1
S1
W
X
YV2
6-6 UPS System Settings and Measurements continued
6 – Standard Operation continued
Settings and Special Functions
After the UPS starts up completely, press
to view settings and execute special functions. Scroll down
to review the settings. Use the
buttontoexecutespecialfunctions.SpecialfunctionsincludebuzzerON
Q1
orbuzzerOFF
Q2
and self-test OFF
R1
orself-testON
R2
.
Changing Default Settings
MakesuretheUPSsystemisOFF
Z
.Pressthe“ON”button
and“Next”button
simultaneously for approximately three seconds until the
buzzersoundstwice,thenreleasethebuttons.Exceptforbuzzer
Q1
/
Q2
and self-test
R1
/
R2
, all other default settings may now be changed
bypressingthe“Previous/ChangeSetting”
button.Afterchangingsettings,pressthe“Enter”button
to save all changes
AA
. To cancel all
changes, press and hold the OFF
button for five seconds, then release the button
BB
.
Buzzer“ON” BypassAcceptanceRange#2 Fixed50HzOutput
Buzzer“OFF” FrequencyToleranceWindow Fixed60HzOutput
Self-Test“OFF” Output Voltage Setting OutputVoltageAdjustment(±3%)
Self-Test“ON”
UPS Off
UPSNormalMode
DataSaved
UPSIdentificationNumber
Settings Changes Canceled
BypassAcceptanceRange#1 UPSEconomyMode ParallelModeEnable/Disable
(P02=ParallelModeEnable)
 previous next