Filter
Top Products
Brownout correction Maintains continuous operation without using battery power during brownout / undervoltage conditions to 156V AC,
increasing output within 2% of selected nominal
LEDS ALARMS & SWITCHES
Front panel LEDs 6 LED DISPLAY: line power, bypass, inverter, charger, output AC and battery operation.
SELECTABLE LCD DISPLAY: input/output voltage, Hz, battery voltage and charge level and detailed warnings
regarding all major UPS functions.
Alarms Multi-function audible alarm offers notification of UPS start, backup operation, low battery, overload, UPS fault, inverter
fault, DC bus fault, overtemperature, remote shutdown, shutdown imminent and shutdown complete
Switches Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions
SURGE / NOISE SUPPRESSION
AC surge
suppression
1320 joules
AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Shipping weight (lbs) 327.56
Shipping weight (kg) 147.4
Unit weight (lbs) Power Module 54.8 lbs. (59.8 lbs w/SUPDMB710HW); Battery Pack: 158.73 lbs.
Unit weight (kg) Power Module: 24.66kg (26.91kg w/SUPDMB710HW), Battery Pack: 71.43kg
Unit Dimensions
(HWD/in)
Power Module 5.14 x 17.5 x 25 (30.25 in. depth w/SUPDMB710HW), Battery Pack 5.16 x 17.5 x 2
Unit Dimensions
(HWD/cm)
Power Module 13.1 x 44.5 x 63.5 (76.8 cm depth w/SUPDMB710HW); Battery Pack 13.1 x 44.5 x 63.5
Material of
construction
Steel
Form factors
supported
Rack (6U)
Cooling method Built-in cooling fan
Battery Access User replaceable, hot swappable external battery pack
ENVIRONMENTAL
Relative Humidity 0 to 95%, non-condensing
Storage Temperature +5 to +122 degrees Fahrenheit
Operating
Temperature
+32 to +104 degrees Fahrenheit
COMMUNICATIONS
Network monitoring
port
Includes 2 built-in DB9 monitoring ports (1-RS232 / 1-contact closure)
Software and cabling
included
Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling
included.
SNMP compatibility Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
WatchDog
compatibility
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot
of application / OS or hard power off/on reboot of connected equipmentideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
Zero transfer time: on-line UPS continuously converts incoming AC to DC, then back to AC. When line power is
interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
Low voltage transfer
to battery power
Maintains continuous operation during undervoltages as low as 156V AC. Below this point, output is maintained utilizing
battery reserves.