Tripp Lite SU2200XLA Power Supply User Manual


 
Unit Dimensions
(HWD/cm)
26 x 22.9 x 49.5
Material of
construction
Steel
Form factors
supported
Tower
Cooling method Built-in cooling fan
Battery Access User-replaceable, hot-swap battery replacement supported via battery access panel
ENVIRONMENTAL
Relative Humidity 0 to 95%, non-condensing
Storage
Temperature
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Operating
Temperature
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Line mode BTU/hr.
(Max.)
816
Battery mode
BTU/hr. (Max.)
889
Audible Noise
COMMUNICATIONS
Network
monitoring port
USB port and DB9 serial port. DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure
monitoring ability. HID-compliant USB port enables integration with built-in power management and auto shutdown
features of Windows and Mac OS
Software and
cabling included
PowerAlert Software on CD-ROM and complete cabling
SNMP compatibility Slot for optional SNMPWEBCARD accessory (part #: SNMPWEBCARD)
WatchDog
compatibility
Compatible with Tripp Lite's Watchdog Service Monitoring and Control Software to restore operation to locked equipment
through soft reboot of application/OS or hard power off/on reboot of connected equipmentideal for unattended kiosk
applications
LINE / BATTERY TRANSFER
Transfer time from
line power to
battery mode
Zeroonline UPS continuously converts incoming AC to DC, then back to AC. When commercial power is interrupted,
UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power
Low voltage
transfer to battery
power
Maintains continuous operation during undervoltages as low as 65V (80V at load levels over 70%). Below this switchover
point, output is supported from battery-derived AC power
High voltage
transfer to battery
power
Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is
supported from battery-derived AC power
SPECIAL FEATURES
EPO port Supports "Emergency Power Off" via set of dedicated built-in EPO jacks
Cold Start Inverter can be cold started to enable temporary AC output during a power failure
Appearance Attractive all-black color scheme
BATTERY PACK ACCESSORY (optional)
Battery Pack
Accessory
(optional)
BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible)
CERTIFICATIONS
Certifications Tested to UL1778 (USA), CSA (Canada), NOM (Mexico), Class A (emissions), FCC Part 68/Industry Canada, RoHS
compliant
WARRANTY
Product Warranty
Period
2 years