Filter
Top Products
41
1
5
9
3
7
11
2
6
10
4
8
12
13
14
10 – Display and Confi guration (continued)
10-11 Local Setup Menu (continued)
From the “AUDIBLE” screen, use the scroll buttons (• , ) to
select the desired settings for the audible alarm and press the enter
button (
) to confirm the setting.
From the “DISPLAY” screen, use the scroll buttons (•
, ) to
select the desired LCD contrast setting and press the enter button
(
) to confirm the setting. Note: Changing this setting does not
require an administrator login – a user login is sufficient.
From the “LANGUAGE” screen, use the scroll buttons (•
, )
to select the desired setting and press the enter button (
) to
confirm the setting. Note: Changing this setting does not require
an administrator login – a user login is sufficient.
From the “SERIAL COM ID” screen, use the scroll buttons •
(
, ) to select the desired serial port ID and press the enter
button (
) to confirm the setting. Note: This setting does not
apply to standard RS-232 connections. It only applies for RS-485/
RS-422 communications.
Note: Press the “ESC” button to return to the previous menu.
10-12 Maintenance Menu
Press the enter button (• ) to select “MAINTENANCE” from
the main menu. Follow the login procedure described in step 2 and
step 3 of
Section 10-7.
After the correct password has been entered, the LCD screen will •
show the maintenance menu. Use the scroll buttons (
, ) and the
enter button (
) to select a menu choice.
7
1
8
2
9
6
6
7
1
2
8
9