Tripp Lite B030-002-R Switch User Manual


 
Tr
oubleshooting
If you are experiencing problems, first make sure that
there are no cable problems. Check all cable connections.
7
2. Auto Scan Mode:
Auto Scan** automatically switches between PCs at
regular 10 second intervals. To invoke the Auto Scan
Mode, press and release the [Scroll Lock] key twice,
then press and release the [0] key. Scanning continues
until the [spacebar] is pressed to exit the Auto Scan
Mode. The port that was active when the [spacebar]
was pressed remains active.
** Note: While Auto Scan Mode is in effect, none of
the other keyboard keys will function. The Auto Scan
Mode must be exited in order to use the console for
anything else.
Specifications
B030-002-R
CPU Ports 2
Port Selection Hotkeys
Connectors CPU 2 x 6-foot-long built-in cable kits,
each with 2 x PS/2 and 1 x HD-15
Console 2 x PS/2 and 1 x HD-15
LEDs 2 Selected Port
Emulation Keyboard PS/2
Mouse PS/2
Scan Interval 10 seconds
Operating Temperature 32° F to 104° F
Storage Temperature -4° F to 140° F
Humidity 0 - 80% RH, Noncondensing
Housing Plastic
6
Problem Cause Solution
Mouse Not
Responding*
Mouse needs
to be reset
Unplug the mouse from the
Switch, then plug it back in.
Switch needs
to be reset
Turn off the PCs.Wait 5
seconds; then turn the PCs on.
Wrong type of
mouse or adapter
The switch will only work with
a PS/2 mouse. A serial mouse
cannot be converted to a PS/2
mouse by using a serial to PS/2
adapter. One exception is a
combo-mouse which is specifi-
cally designed for both applica-
tions. In this case, ensure that
the mouse is set up for PS/2
mode and is being used with
the adapter originally provided.
Unsupported or
incorrect mouse
driver
Each PC needs to be using
the mouse driver correlating to
the mouse connected to the
console port.
Some newer mice (with extra
buttons and wheels) have
unique drivers that may not be
supported.Try a regular mouse
with a generic mouse driver
(like the one that comes with
the operating system).
Video
Problems
Resolution and/or
Bandwidth set too
high
The Switch supports VGA,
SVGA, Multisync, and XGA
(interlaced) monitors with
resolutions of up to 2048 x
1536 Hz.
200312045 B030-002-R owners manual.qxd 1/6/2004 3:26 PM Page 6