Filter
Top Products
5
Installing the USB-to-Serial Adapter
(continued)
9. Press the Finish button to continue. The
USB adapter installation is complete.
Figure 5 - Windows XP Finished installing prompt
indicates that the adapter has been successfully
installed.
Installing under Windows 2000
Follow these steps to install the USB-to-Serial
adapter under Windows 2000.
1. Turn on the power to your computer
system. This is the system in which the device
is to be installed.
2. Plug the wide flat end of the USB cable into
the downstream connector. This is the
connector located on the back of the computer
or USB hub.
3. Plug the square end of the USB cable into
the back of the USB-to-Serial adapter.
Windows tells you that it has found new
hardware and launches the Add New Hardware
Wizard. The Found new hardware prompt
displays (figure 6).
4. Click the Next button. The Search for display
drivers prompt displays (figure 7).
Figure 6 - Windows 2000 found new hardware prompt.
Figure 7 - Windows 2000 search for display drivers
prompt.
200612037 93-2646 U209 OM.qxd 12/12/2006 9:35 AM Page 5