Filter
Top Products
45
1
5
9
3
7
11
2
6
10
4
8
12
13
14
10 – Display and Confi guration (continued)
10-16 Firmware Upgrade Menu
Warning: The firmware should be upgraded by qualified service personnel only. Use only firmware that has been approved by Tripp Lite.
Failure to comply will void the warranty.
Enter the maintenance menu as described in •
Section 10-12. Use
the scroll buttons ( , ) to move the cursor to “FIRMWARE
UPGRADE”, then press the enter button ( ).
Use the scroll buttons (• , ) and the enter button ( ) to
select one of the menu choices. You must enter the administrator
password to confirm the operation.
Note: Press the “ESC” button to return to the previous menu.
10-17 Other Menu Choices
Enter the maintenance menu as described in • Section 10-12. Use
the scroll buttons ( , ) to move the cursor to “OTHERS”, then
press the enter button ( ).
Use the scroll buttons (• , ) and the enter button ( ) to select
a menu choice. “SN & FW VERSION” shows the serial number
and firmware version of the UPS system. “SYSTEM TIME” shows
the UPS system’s current date and time. “MODULE DC BUS
VOLT” shows the current voltage of the DC bus. Qualified service
personnel may wish to view this information when performing
maintenance or repair on the UPS system.
Note: Press the “ESC” button to return to the previous menu.
1
1
2
2
1
1
2
2
200706017 93-2688 SU manual 4C.indd 45200706017 93-2688 SU manual 4C.indd 45 11/29/2007 2:03:02 PM11/29/2007 2:03:02 PM