Filter
Top Products
creating, as shown below.
3. In the General tab, specify the following parameters:
v Profile Name: Type a name for the profile you are creating.
v Network Names: Specify up to three service set identifiers (SSIDs) for this
configuration profile. To enable connection to any access point, leave all three
fields empty.
4. Click the Security tab and the following screen is shown.
Click the appropriate selection:
v Encryption (WEP Security): Enables you to use pre-shared keys that are
defined on both the access point and station. If you select this setting, click
the Define Encryption (WEP Security) button to display the following
14 802.11a/b/g Wireless CardBus Adapter: User’s Guide