Filter
Top Products
10
5.3. EMULATION STAR SP200
Command Hex Code Description
BEL <07>H
Differed drive command “A” for peripheral unit
(Default setting)
CAN <18>H Cancel print data in buffer
LF <0A>H Line feed
CR <0D>H Line feed (same as LF)
SO <0E>H Select expanded character mode
SI <0F>H Cancel expanded character mode
FS <1C>H Immediate drive command “B” for peripheral unit 1
DC4 <14>H Cancel expanded character mode
ESC BEL
n1 n2
<1B>H<07>H<n1><n2>
Adjust drive pulse width for peripheral unit
(Default setting)
ESC @ <1B>H<40>H Initialize printer
ESC M <1B>H<4D>H
Select 7 x 7 (Half dots) character size
(Default setting)
ESC R n <1B>H<52>H<n> Select international character set
ESC P <1B>H<50>H Select 9 x 7 (Half dots) character size
ESC W 1
<1B>H<57>H<31>
H<1B>H<57>H<1>
Select expanded character mode
ESC W 0
<1B>H<57>H<37>
H<1B>H<57>H<0>
Cancel expanded character mode
ESC a n <1B>H<61>H<n> Feed paper n lines