Filter
Top Products
Chapter 2: Setting Up 39
2.6 Installing the LCM Kit (Option)
To install a LCM kit, you need to remove all the fans, fan cra-
dle, and unfasten an empty drive bracket from the chassis
first. Refer to the first four steps given in “2.5 Installing the
Floppy Disk Drive (Option)”. Then, do the following:
1. Install the LCD module as shown.
2. Connect the following cables to the M1000 LCD module
as shown.
a. 4-pin power supply cable to M1000 J6 connector.
b. LCD cable to M1000 J3 2x3 pin connector.
NOTE: M1000 pin 2-3 of JP1 and JP2 should be closed.
(a)
(b)