Filter
Top Products
39
http://www.tyan.com
2.28 – Finishing Up
Congratulations on making it this far! You’re finished setting up the hardware aspect
of your computer. Before closing up your chassis, make sure that all cables and
wires are connected properly, especially IDE cables and most importantly, jumpers.
You may have difficulty powering on your system if the motherboard jumpers are
not set correctly.
In the rare circumstance that you have experienced difficulty, you can get help by
asking your vendor for assistance. If they are not available for assistance, please
find setup information and documentation online at our website or by calling your
vendor’s support line.