Filter
Top Products
44
Native Mode Operation
This feature is used to choose Native Mode for ATA. However, certain OS is not
supported under Native Mode.
Options: Auto / Serial ATA
SATA RAID Enable
When this option is enabled, the Silicon Image RAID BIOS is loaded on system start
up, allowing for configuration of hardware RAID arrays. With the SATA RAID ROM
option disabled, the drives attached to the controller can only act independently of
one another.
Options: Enabled / Disabled
SATA AHCI Enable
This item allows you to enable the SATA AHCI functionality.
Options: Disabled / Enabled
SATA AHCI Legacy Enable
[Enabled]: SATA and PATA drives are auto-detected and placed in Legacy Mode.
[Disabled]: SATA and PATA drives are auto-detected and placed in Native IDE
mode.
Options: Disabled / Enabled