Filter
Top Products
58
http://www.tyan.com
Mode:
Options: Normal / IR / ASK-IR
Base I/O Address
Set the base I/O address for serial port B.
Options: 3F8 / 2F8 / 3E8 / 2E8
Interrupt
Set the interrupt for serial port B.
Options: IRQ3 / IRQ4
Parallel Port
Configure parallel port using options:
[Disabled]: No configuration
[Enabled]: User configuration
Options: Disabled / Enabled / Auto
Base I/O Address
Set the base I/O address for the parallel port.
Options: 378 / 278 / 3BC
Interrupt
Set the interrupt for the parallel port.
Options: IRQ5 / IRQ7
Mode
Set the mode for the parallel port using options: [Output Only], [Bi-directional],
[EPP], [ECP].
Options: Output Only / Bi-directional / ECP / EPP
DMA Channel
Set the DMA channel for the parallel port.
Options: DMA1 / DMA3
Floppy Disk Controller
This defines how the floppy disk controller is detected and configured.
Options: Disabled / Enabled / Auto
Base I/O Address
Set the base I/O address for the floppy disk controller.
Options: Primary / Secondary