Filter
Top Products
23
8. Repeat this procedure for the second processor.
Cooling Fan Installation
After you have installed the processor, the heatsink should be installed to ensure
that the processor runs efficiently and does not overheat. Use the heatsink supplied
for best results.
Follow these instructions to install the heatsink shown.
1. Apply some (a little will work, more doesn’t equal better performance) thermal
compound to the top of the processor. Try and apply a thin, even layer over
the top of the processor.
2. Align the heatsink with the four holes around the processor socket.
3. Press the heatsink down until the four screws are securely seated in the holes.
4. Use screw drive to secure the four screws.
CPU VRD Heat Dispersion Notice
INSTALL FAN INTO CHASSIS TO LET AIR FLOW IN!!!
-To ensure that the board runs efficiently and does not overheat, make sure there is
air flow around the CPU VRD (as shown) to help disperse the heat generated
around the CPU.
CPU
V
RD
CPU
V
RD