Filter
Top Products
3. Connect the mouse and keyboard cables to the PC. The mouse port on the PC is green and the
keyboard port is purple.
Figure 2: Rear View of PC and Top views of keyboard and mouse
4. Label Printer option: Locate the printer data cable. Connect the DB25 end to the parallel port on
the PC. Next connect the other end to the connector on the back of the label printer, and then
close the clamps on each side. Finally, connect the power cable from the AC power supply to the
back of the printer, and plug the AC cord into the wall outlet or optional Power Conditioner.
Figure 3: Rear View of Label Printer
© 2008 UTC RETAIL. All rights reserved. 11692015 Rev B Page 5 of 8