Filter
Top Products
5.1.1. Re-transfer settings
Ribbon Type Counts per roll (1000, 750)
Temperature -3 (Low) ..Standard + 2 (High)
Speed (Front/Back) -10 (Slow) .. Standard .. +2 (Fast)
5.1.2. Bend remedy
Temperature Off .. -5 (Low) .. Standard .. 0 (High)
Speed -2 (Slow) .. Standard .. +2 (Fast)
Cooling Time 0 sec .. 15 sec
Note: Cooling Time is only available if temperature is not Off.
5.1.3. Ink settings
Ribbon Type YMCK, YMCK + PO, YMCKK
Note: The auto detection function will always show the currently mounted type of color ribbon.
Resin Black -3 (Thin) .. Standard .. +5 (Thick)
Resin Black Mode Normal .. Fine
Special Ink: 1/2
(for future use)
-3 (Thin) .. Standard .. +3 (Thick)
5.1.4. Other settings
ISO Type HiCo or LoCo Magstripe Cards
Card Type Normal or Cybernetic Size (future use)
Printer Stand By No .. 60 minutes
Buzzer On or Off
Prima 3 Driver Manual
45