Package Contents
Package includes the following:
18
Necessary Cables: UTP (Unshielded Twisted Pair) Cable
LED Indicators: Per Device: Power
Per Port: LINK/ACT, FDX/COL
Performance Specifications
Transmission Method: Store and forward
MAC address table: 8K-entry MAC address table
Maximum Forwarding Rate: 14,880 pps /10Base-T
(64byte packets) 148,800 pps /100Base-TX
Maximum Filtering Rate: 14,880 pps /10Base-T
(64byte packets) 148,800 pps/100Base-TX
Flow control: Back-pressure (half-duplex)
Pause frame (full-duplex)
Duplex mode: Supports both Half-duplex and
Full-duplex mode
Physical & Environmental Specification
Power Supply: 100-240V AC, 50-60Hz
Internal universal power supply
Dimensions: 440mm x 161mm x 44mm (LxWxH)
17.6” x 6.44” x 1.76” (LxWxH)
Operating temperature: 0˚C to 45˚C (32˚F to 113˚F)
Storage temperature: -40˚C to 70˚C ( -40˚F to 158˚F)
Humidity: 10% to 90% (non-conditioning)
EMI: FCC Class A, CE mark
Safety: UL, cUL
FCC Statement
This equipment has been tested and found to comply with the limits for a class B device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference with radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in
which case, the user will be required to correct the interference at the user’s expense.
■ Dyna-Switch/16 or 24
■ Rack-mounting brackets
■ AC power cord
■ Four (4) adhesive-backed rubber feet
■ User’s manual
■ Warranty card
Dyna-Switch/16 or 24 AC power cord rubber feet User’s Guide
Rack-mounting Brackets Figure 1. Contents of package.
IMPORTANT: If any piece is missing or damaged, please contact your
local dealer or reseller for service.
For Your Records
Product Name:
Serial Number:
Date of Purchase:
Purchased from:
Notes: