8
Network Application
This section provides a few samples of network topology in which the switch
is used. The DYNA-SWITCH/24 (Rev. 2.0) is designed to be used as a
segment switch. With its large address table (4K MAC address) and high
performance, it is ideal for interconnecting networking segments.
PC, workstations, and servers can communicate with each other by directly
connecting with the DYNA-SWITCH/24. The switch automatically learns
nodes address, which are subsequently used to filter and forward all traffic
based on the destination address.
By using any port as an Uplink port, the Switch can connect with another
switch or hub. This connects each of your small-switched workgroups to form
a larger switched network.