Filter
Top Products
20
Listening to AM/FM/TV Channels
Listening to AM/FM/TV Channels
To listen to AM/FM/TV channels, slide the
mode selector to AM/FM. Then, press the
button at the top of the scanner to select
the desired source (AM for AM Broadcast,
FM1 or FM2 for FM or TV Broadcast).
Directly Selecting a Channel
Press SVC/DIR to select the direct entry
mode. Use the ▲/▼ buttons to step through
the selected band. The scanner stops on
active channels. TV channels are scanned
after FM channels in FM mode.
You can also enter the channel frequency
using the keypad, enter the channel
frequency (for FM or AM) or the TV channel
number and press E.
Using AM/FM/TV Channel Memory
Your scanner has 30 AM/FM memories for
quick channel recall (10 for AM, 20 for
FM/TV). To store a channel into memory, first
select the band (AM, FM1 or FM2). Then,
directly select the channel you want to store
(see above). While listening to the channel,
press and hold the number button that
corresponds to the memory you want to save
the channel into for 2 seconds. The scanner
switches to the Memory mode for the current band.
To quickly recall a channel, select the band, select the channel memory
mode by pressing PRI/MEM, then tap the number button that
corresponds to the memory where the channel is stored.
UB337ZH(BC340CRS) 1/13/06 4:19 PM Page 20