Filter
Top Products
Searching for Locked Out Channels
In Scan Mode, you will not see locked out channels.
However, to search for locked out channels and display them
on the screen, use
[UP] and [DOWN] in Scan/Hold Mode.
These keys will enable you to search manually through the
bank in Hold Mode only. "
L/O " will appear on the screen to
indicate the locked out channel.
Restoring a Locked Out Channel
Suppose you want to unlock Channel 12 of the Private
bank. Press
[PRIVATE] to start scanning. Press [HOLD] to
stop scanning. ("
HOLD " & " SCAN " must appear on the
screen.) Use
[UP] or [DOWN] to find locked out Channel 12
(which shows "
L/O"). Then press [L/O]. "L/O" disappears to
indicate that Channel 12 is now unlocked and restored for
scanning.
Note: For the factory pre-programmed channels, the earliest
channel will be unlocked, when you lock out more than 30
channels.
Restoring All Locked Out Channels
1. You can unlock all locked out channels in any bank at one
time. Press a bank key to start scanning.
2. Press
[HOLD] to stop scanning.
3. Press and hold down
[L/O] ("L/O" appears on the screen)
for more than 2.5 seconds until you hear the multi-beep
("
L/O" disappears).
Now all locked out channels in the bank are unlocked and
restored for scanning.
21
UB317Z (BC350C) 0916 9/16/03 12:43 PM Page 21