Filter
Top Products
30
The Bank label/icon for the scanned frequency ashes while that
bank is scanned. When an active frequency is found, the scanner
stops on that frequency and the Bank label/icon remains steady.
When transmission ends, the scanner pauses 2 seconds for a new
transmission. If no new transmission is found, scanning resumes.
Press UP to manually continue scanning. Multiple active banks are
scanned in order.
Note: Before you can scan the Private bank, you must program
frequencies into the channels. Refer to “Private Bank” on page
50.
SEARCH
Search lets you search through pre-grouped bands of frequencies.
Press BAND key to select 1 of 13 separate frequency bands to
search. Press the SEARCH key to begin searching. The scanner
displays frequencies as it searches and stops on active frequencies
until that transmission ends. If no transmission resumes after 2
seconds, the search automatically continues through the rest of
the band. Use the UP or DOWN key to change the direction of the
search or press the BAND key again to change bands.