Filter
Top Products
22
Storing Search Frequencies
You can quickly store any frequency you find during Search.
Caution: You must determine the channel in which you will
store the frequency before entering the search
mode. Otherwise, you may erase a stored
frequency that you want to keep.
1. Press .
2. Select a channel.
a. Enter the channel number.
b. Then press again.
– OR –
Press ▲,▼, or
repeatedly until the channel
number appears in the display.
3. Select one or more of the
personal search bands.
For example, select CHAIN 2.
Note: These frequencies were
used during “Setting a
Search Range,” on page
18.
4. Press .
5. When the scanner stops at the
frequency you want, press
either or .
Note: After this step you are in
search Hold mode. Press
to resume scanning.
a
b
BC45XLT 11/2/00 9:04 Page 22