Filter
Top Products
25
General Use
•Turn the scanner off before replacing the batteries.
•Always write down the programmed frequencies in the event
of memory loss.
•If memory is lost, simply reprogram each channel.
The display shows 000.0000 in all channels when there has
been a memory loss.
•Always press each button firmly until you hear the entry tone
for that key entry.
Location
•Do not use the scanner in high-moisture environments such
as the kitchen or bathroom.
•Avoid placing the unit in direct sunlight or near heating
elements or vents.
•If the scanner receives strong interference or electrical
noise, move it or its antenna away from the source of the
noise. If possible, a higher elevation, may provide better
reception. Also try changing the height or angle of the
antenna.
Cleaning
•Remove the batteries before cleaning.
•Clean the outside of the scanner with a mild detergent. To
prevent scratches, do not use abrasive cleaners or solvents.
Be careful not to rub the LCD window.
•Do not use excessive amounts of water.
Care and Maintenance
BC45XLT 11/2/00 9:04 Page 25