Filter
Top Products
Care and Maintenance
Low Battery Warning
When the Batteries become weak, you will hear an audible
warning. Be sure to replace Alkaline Batteries as soon as
possible, or you can recharge Nickel-Cadmium Batteries while
they are installed in the scanner.
Replacing the Batteries
See page six.
Location
If strong interference or electrical noise is received,
relocate the scanner or its antenna away from the
source of the noise. A higher elevation, if possible, may
provide better reception.
Do not use the scanner in high-moisture environments
such as the kitchen or bathroom.
Avoid placing the unit in direct sunlight or near heating
elements or vents.
Cleaning
Disconnect the power to the unit before cleaning.
Clean the outside of the scanner with a mild detergent.
To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCD window.
Do not use excessive amounts of water.
Repairs
Do not attempt any repair. The scanner contains no user
serviceable parts. Contact the Uniden Customer Service
Center or take it to a qualified repair technician.
Proper Care of Your Scanner
Use only the AC Adapter/Charger that came with your
scanner.
Avoid placing the scanner in direct sunlight or near
heating elements or vents.
Do not subject the scanner to extremes in temperature.
If the scanner is exposed to temperatures below 14°F or
above 140°F, the liquid crystal display may temporarily
cease to function properly, or can become permanently
damaged.
20
H:...Bc60xlt.vp
Mon Aug 30 15:34:16 1999
Color profile: Disabled
Composite Default screen