Filter
Top Products
Deleting Stored Talkgroup ID’s
To delete a stored talkgroup ID:
1. While scanning a trunked system in the ID scan mode (see “Scanning Only Stored
Talkgroups”), press ▲/HOLD.
Or, to use the menu system:
2:SCAN OPTION → 2:TRUNK → Select the bank → 3:TALK GROUP
2. Use the scroll bar to select the talkgroup ID you want to delete, then press E.
3. Select 1:ID and press E.
4. Press 0, then press E.
Adding a Text Tag to an ID List
To add a text tag to each of the 10 ID lists in each bank:
2:SCAN OPTION → 2:TRUNK → Select the bank → 6:ID LIST TAG →
Select the list → Enter the alpha tag
Seeing Talkgroup Activity
In the ID Scan mode, the scanner normally only displays the ID for talkgroups that you have
stored into a scan list. This setting lets you see the ID’s for all talkgroups as they become
active when the scanner is monitoring the control channel. The scanner still only switches to
a talkgroup if you have stored it into a scan list.
2:SCAN OPTION → 2:TRUNK → Select the bank → 8:ACTIVITY ID
1:ON
Display every talkgroup ID as it becomes active.
2:OFF
Only display active stored talkgroup ID’s.
54
BC796D(NEW) 10/20/03 11:30 AM Page 54