Filter
Top Products
7
Common Tasks
Hang up a call On a call, press
Multi-function
.
Reject a call Press and hold
Multi-function
until you hear a long beep (about 2 seconds).
Change the volume On a call, press
Volume Up
for more volume or
Volume Down
for less volume.
Mute the
microphone
To mute the microphone so the caller can’t hear you, press and hold
Volume Down
for about
2 seconds. While the microphone is muted, the BTSC1500 plays a melody every 10 seconds to
remind you. To turn the microphone back on, press either
Volume Up
or
Volume Down
.
Open the call log
With the phone in standby, press
Volume Up
to see the outgoing call log or
Volume Down
to
see the incoming call log. To dial the number on the display, press
Multi-function
.
Redial the last
dialed number
With the phone in standby, press
Multi-function
. When the phone displays the number, press
Multi-function
again.
Activate voice
dialing
With the phone in standby, press & hold
Multi-function
for about 2 seconds. When you hear
a beep, you can use any command you have already programmed into your phone. (The phone
must support voice dialing.)
Send a call back to
your phone.
Press and hold
Multi-function
for 2 seconds. The BTSC1500 sends the call to the phone &
disconnects from the phone.