Filter
Top Products
11
Call Waiting
To activate call waiting function, you must subscribe to call
waiting through your service provider, and your phone must
support the hands-free profile.
1. To put your current call on hold and switch between
the two calls, press and hold volume up (+) for about
3 seconds. When you release the button, you’ll be
connected to the waiting call.
2. To hang up your current call and switch to the waiting
call, press and hold volume down (-) for about 3
seconds. When you release the button, you’ll be
connected to the waiting call.
[RECOMMENDED] Press the “SEND” button of your mobile
phone to activate the call waiting function.
[NOTE] Some features may not be compatible with certain mobile.
Inverting The OLED Display
To reverse the OLED display, please press both Multi-
Function button and Volume up (+) button for 3 seconds.
Resetting The BTSC1700
Press and hold Multi-Function button and volume down(-)
button simultaneously for 3 seconds until you hear 2 rings.
Then all information in the BTSC1700 will be deleted.
[NOTE] Resetting is only possible when in standby mode after
disconnecting with your mobile phone.
BTSC1700 OM 11 6/5/11 2:09:10 PM