Uniden Clock Manual

A SERVICE OF

next previous

INSTALLING THE QT-206

1. Find a location on your dash panel which will provide clear viewing

and access to the LCD window.

2. After finding the right location for the indicator unit, mark a 2-inch

hole to be cut out.

3. Check behind the panel for any cables or wiring which could be

damaged. Then cut out the 2-inch hole.

4. Test fit the unit in the hole, and make any adjustments with your

saw or drill.

5. Extending out of the back of the instrument is a brass shaft. Attach

the U-shaped mounting bracket over this shaft, and place the

washer on the shaft. Thread the nut onto the shaft until the

U-shaped bracket is firmly against the back of the dash panel.

6. Look at the front of the instrument to ensure that it is aligned

properly. Then tighten securely.

3

BRASS STUD

P/N: 210-005

WASHER

P/N: 308-029

NUT

P/N: 3203-009

2 3/8"

2 1/2"

2"

1/2"

MOUNTING BRACKET

P/N: 950-025

More

Less

Shallow

Sensitivity

Power

Alarm

X-ducer

Red Black

Shield

+