Filter
Top Products
6.
Press CD to store the entry. The channel number on
the display stops blinking.
BANK
2
18 125.2500
AIR
HOLD
7.
If that frequency is already stored in another channel,
you will hear a "beep", and the duplicate channel
number will appear on the display.
8.
If you want to store the frequency in the selected
channel (18) as well, press CD again. Or, press CV
and enter another frequency for the currently selected
channel. The channel number on the display stops
blinking.
Note: Any frequency already stored in any channel
will automatically be replaced by the new one.
If you try to enter a frequency that is outside one of the
10 Bands, you will hear a "beep", and the word "Error"
appears on the display.
BANK
2
18
Error
HOLD
Press 0 and re-enter the correct frequency.
9. To program another channel, repeat the above
procedures.
Deleting a Stored Frequency
To delete a frequency from a channel:
1. Displaythe channel and frequency to be deleted.
2.
Press CD on the numeric keypad.
Press CD. The current channel is erased, and the
display shows 000.000.
Note: That channel will be skipped during scanning.
3.
15