Filter
Top Products
Programming
Before the UBC785XLT can begin conventional scanning, you must program a frequency
into at least one channel.
Repeat this procedure for each channel you want to program.
Storing Frequencies into Channels in Menu Mode
1. Prepare frequencies you received from your dealer or from various sources on the
internet.
2. Press
MENU.
3. Select
2:SCAN OPTION by rotating the VFO and pressing E.
4. Enter the channel number using the keypad, then press E.
5. Select
1:FREQUENCY by rotating the VFO and pressing E.
Then enter the frequency.
6. Enter the alpha tag and press
E.
(See page 26.)
7. The following display appears. Select the action by rotating
VFO, then press E.
If you want to program other channel,
select
1:OTHER CHANNEL.
If you want to set other settings for this channel,
select
2: CHANNEL OPTION.
If you want to exit the menu, select
3:DONE.
☞ Remember! You can also use ▲ or ▼ instead of rotating the VFO.
Also instead of pressing
E, you can press the VFO control.
24
1:OTHER CHANNEL
2:CHANNEL OPTION
3:DONE
C 001
855.0000 FM
ALPHA TAG
¡
C 001
1:FREQUENCY
2:DELAY
3:TONE DATA
C 001
855.0000 FM
ENTER CHANNEL No
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 24