Filter
Top Products
4-77
= ‘1’ ;fail
= ‘2’ ;busy
= ‘3’ ;timeout
NAK means command format error or checksum error.
For the host to download the template saved on its disk, it should
issue ESC L command first to download the template to the MR350
MKII reserved file $FP.DNL and then issue ESC $L command to
download it to MV1100 if ESC L command is successful.
ESC $S Set Globe Threshold ()
The command sets the globe verification value for MV1100 .
==> STX ESC $S THRESH CS2 ADDR
<== STX ESC $S RESULT CS1 CS2 ETX
or
<== NAK
THRESH = ‘1’ ,very high security
= ‘2’ ;high security
= ‘3’ ;medium security
= ‘4’ ;low security
= ‘5’ ;very low security
RESULT = ‘0’ ;success
= ‘1’ ;fail
= ‘2’ ;busy
= ‘3’ ;timeout
NAK means command format error or checksum error.
ESC $S Get Globe Threshold ()
The command sets the globe verification value for MV1100 .
==> STX ESC $S CS2 ADDR
<== STX ESC $S RESULT < ,THRESH > CS1 CS2 ETX
or
<== NAK
RESULT = ‘0’ ;success
= ‘1’ ;fail
= ‘2’ ;busy
= ‘3’ ;timeout
If RESULT = ‘0’, MR350MKII will response with
THRESH field: