Filter
Top Products
3
This is one of many possible configurations.
Note: For networking information, refer to your operating system’s documentation.
Register your product online at http://www.usr.com/productreg
Troubleshooting
My 24-Port 10/100/1000Mbps Switch is properly connected to my
Ethernet-ready device but my connection speed is slow.
Possible Solution:
Verify that your network adapter and/or additional Ethernet-ready device supports 1000 Mbps.
You may be using a 10/100 Mbps device. A blinking orange light indicates you are receiving and
transmitting data at 10/100 Mbps. A blinking green light indicates you are receiving and transmit-
ting data at 1000 Mbps. To achieve 1000 Mbps speeds, replace any 10/100 Mbps devices you are
using with 1000 Mbps devices.
Possible Solution:
Verify you are using a known and reliable RJ-45 Category 5 Ethernet cable. An old or unreliable RJ-
45 Category 5 Ethernet cable could diminish your link quality. It may be necessary to replace your
RJ-45 Category 5 Ethernet cable.
Possible Solution:
The length of your Ethernet cable between your 24-Port 10/100/1000Mbps Switch and your
workstation or computer should not exceed 328 feet. Some power sources with strong
electromagnetic fields may be causing interference.
1357
2468 10
9111315
12 14 16 18
17 19 21 23
U.S. Robotics
10/100/1000 Mbps
24-Port Switch
FDX/HDX
LNK/ACT
LNK/ACT
Green = 1000M Orange = 10/100M
FDX/HDX