Filter
Top Products
6
English
1. Unplug the power adapter from the print server.
2. Press and hold the
RESET button.
3. Plug the power adapter back in to the print server.
4. Release the
RESET button.
I am unable to add my printer in Add Printer Wizard.
Solution:
Your printer may not be compatible with the Wireless USB Print Server. Close all
the print server setup screens and disconnect the printer from the print server.
1. Install the printer on your computer according to the printer manufacturer’s
instructions.
2. When finished, reconnect the printer to the print server.
3. Click Windows
Start > Programs > U.S. Robotics Print Server > Print Driver
Setup
.
4. Follow the on-screen instructions to complete the installation.
I am unable to print a test page.
Solution:
1. Windows XP, 2000, and NT Users:
o
Click Windows Start > Printers and Faxes.
Windows Me, 98, and 95 Users:
1) Click Windows
Start > Settings > Control Panel.
2) Within Control Panel, click
Printers and Faxes.
2. Right-click the printer you just installed, select
Properties, and then click the
Ports tab.
3. Make sure the print server port is selected. If it is not, select it, click
Apply,
and then click
OK. You should now be able to print a test page.
I am unable to print via a wireless connection or the Wireless
USB Print Server is not connecting to my wireless network.
Solution 1:
Make sure you have the SSID and security information that match the settings of
the wireless router in your network. If any of this information doesn’t match, you
will not be able to connect to the wireless network. You will need to reconnect
the print server to your router using an Ethernet cable in order to make any con-
figuration changes.
Solution 2:
Make sure your router or access point is using only WEP or WPA-PSK with
TKIP for security. These are the only two types of security that the Wireless USB
Print Server supports.