Filter
Top Products
6
English
I cannot access the router’s Web User Interface.
Possible Solution:
Make sure that the power cord and all the Ethernet cables are connected
correctly. This includes the cables connecting the Wireless 54Mbps ADSL
Router and all the computers.
Possible Solution:
Make sure that your computer is using an IP address that is within the default
range of 192.168.2.xxx. Make sure the address of the subnet mask is
255.255.255.0. The Default Gateway should be the IP address of the Wireless
54Mbps ADSL Router, which is 192.168.2.1.
Windows 95, 98, or Me Users:
Click Windows Start and then Run. Type winipcfg and click OK. Check the
IP Address, Subnet Mask, Default Gateway, and DNS server data to make
sure they are correct. If the information is not correct, click Release All
and then click Renew All.
Windows NT, 2000, or XP Users:
Click Windows Start and then Run. Type cmd and click OK. At the DOS
prompt, type ipconfig /all. Check the IP Address, Subnet Mask, Default
Gateway, and DNS server data to make sure they are correct. If the
information is not correct, type ipconfig /release and press ENTER. Then,
type ipconfig /renew and press ENTER.
Possible Solution:
Verify the connection setting of your Web browser and that the HTTP Proxy
feature of your Web browser is disabled. You need to do this so that your Web
browser can read the configuration pages inside your Wireless 54Mbps ADSL
Router. Launch your Web browser.
Internet Explorer users:
Click Too ls , Internet Options, and then the Connections tab. Select Never
dial a connection, click Apply, and then click OK. Click Tool s again, then
click Internet Options. Click the Connections tab, and click the LAN
Settings button. Clear all the check boxes and click OK. Click OK to close
Internet Options.
Netscape Navigator users:
Click Edit, Preferences, and then double-click Advanced in the Category
window. Click Proxies, select Direct connection to the Internet, and then
click OK. Click Edit
again, then click Preferences. Under Category, double-
click Advanced, then click Proxies. Select Direct connection to the
Internet and click OK.