Filter
Top Products
10
Status Page
(4) By clicking "Status", you will see information
pertaining to your NAS and Hard Drive.
( Figure 5.3-C )
(1) Click on "Change"
( Figure 6.1-A )
(2) Enter desired Host and Group name.
When finished, press "OK". (Figure 6.1-B)
The Status Tab is where you can change the
host name, group name and administrator's
password. You may also disable or enable
features on the NAS such as DHCP server,
SMB server and FTP server. Information
about the NAS are also displayed in the
“Status” tab also such as the information of
Hard disk, IP address, MAC address and
current installed firmware version.
( Figure 5.3-C )
( Figure 6.1 A )
( Figure 6.1-B )
( Figure 6.1-A )
6. Status Page
6.1 Changing the host name and
group name.