Filter
Top Products
Troubleshooting /FAQ
15
8. Troubleshooting /FAQ :
A: Please make sure the HDD has been initialized and
partitioned before hardware installation. Please refer
to section 7. Creating A New Partition.
1. I can only find the USB icon in the system
tray, but can’t find the hard disk in
“MY COMPUTER” after hardware installation ?
A: NexStar 3 might have compatibility issues with
few older 3.5” SATA HDDs, but no problem with
new versions of 3.5” SATA HDDs.
2. Does the NexStar 3 have any compatibility
issue with any 3.5 inches SATA HDD ?
A: Formatted through the Disk Management tool
provided by Windows systems, the maximum
formatted capacity of FAT32 is 32GB.
3. What is the max. Capacity of FAT32 format ?
A: Yes. NexStar 3 can support multiple partitions with
different formats. You can format it under FAT32 and
NTFS depending on your demand. Only under
Windows ME and Windows 98SE, we recommend
that it’s better to use FAT32 FORMAT to all partitions
because NTFS FORMAT is not supported by
these two OS systems.
5. Does NexStar 3 supports multiple partitions
with different formats (FAT32 or NTFS) ?
4. What is the max. capacity that NexStar 3
can support ?
A: Currently, the NexStar 3 supports Serial ATA hard
drive up to 1TB. Updated information will be
provided in the future as hard drive capacity
increases.
About the Hard Disk：