Verizon 595 Network Card User Manual


 
Regulatory notices
The design of the AirCard 595 complies with U.S. Federal Communications Commission (FCC) guidelines respecting
safety levels of radio frequency (RF) exposure for portable devices, which in turn are consistent with the following
safety standards previously set by U.S. and international standards bodies:
ANSI / IEEE C95.1-1999, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3kHz to 300 GHz
National Council on Radiation Protection and Measurements (NCRP) Report 86, 1986, Biological Effects
and Exposure Criteria for Radio Frequency Electromagnetic Fields
Health Canada, Safety Code 6, 1999, Limits of Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz
International Commission on Non-Ionising Radiation Protection (ICNIRP) 1998, Guidelines for limiting
exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)
FCC ID: N7NAC595
IC (Industry Canada) ID: 2417C-AC595
CAUTION: The AirCard 595 has been tested for compliance with FCC / IC RF exposure limits in the laptop
computer(s) configurations with the side loading PC Card slot and can be used in laptop computers with substantially
similar physical dimensions, construction, and electrical and RF characteristics. This PC card must not be co-located
or operated in conjunction with any other antenna or transmitter. Use of this device in any other configuration may
exceed the FCC RF Exposure compliance limit. Note: If this PC Card is intended for use in any other portable
device, you are responsible for separate approval to satisfy the SAR requirements of Part 2.1093 of FCC rules.
Where appropriate, the use of the equipment is subject to the following conditions.
Federal Communications Commission Notice (FCC -- United States)
AirCard 595 PC Card User Manual
9
Electronic devices, including computers and wireless modems, generate RF energy incidental to
their intended function and are therefore subject to FCC rules and regulations.
This equipment has been tested and found to comply with the limits for a Class B computing
device peripheral, pursuant to Part 15, 22, and 24 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/television technician for help