Victor 1280-7 Calculator User Manual


 
P NP PC
P Print Mode: The printer is activated as long as the calculator is turned on.
NP Non Print Mode: The printer is activated only when the paper feed key or the
non-add / date key (#/S) is pressed. This is also called the display only mode.
PC PC Mode: In this mode the calculator will send the information entered to a
computer just as it would to the paper in a printer. The number entered will
appear in the first column and the operation performed will appear in the second
column. This is also called the Paperless Tape Mode.
The Wireless Data Relay device must be installed into the computer’s USB
port when using any of the three PC Modes.
Wireless Data Relay (Fig. 9)
5/4
Round Up Mode: The setting causes an answer to a calculation to
automatically round up.
5/4 Split Rounding Mode: This setting causes automatic round off. If the first digit
of the answer beyond the decimal setting is 0 to 4, the value is rounded down.
Otherwise the value is rounded up.
Round Down Mode: Causes calculations to automatically round down.
(Truncate)
Σ GT
Σ Sigma Mode: When the slide switch is in the Sigma position, the results of
multiplication or division calculations completed by the = or % keys are
automatically added to the accumulator. The accumulated answer can be recalled
by pressing the T key.
The calculator is in neither Sigma mode nor Grand Total mode.