ViewSonic G510b Computer Monitor User Manual


 
Troubleshooting
No power
Make sure power button (or switch) is ON.
Make sure A/C power cord is securely connected to the LCD display.
Plug another electrical device (like a radio) into the power outlet to verify that
the outlet is supplying proper voltage.
Power is ON but no screen image
Make sure the video cable supplied with the LCD display is tightly
secured to the video output port on the back of the computer. If the other end
of the video cable is not attached permanently to the LCD display,
tightly secure it to the LCD display.
Adjust brightness and contrast.
If you are using an Macintosh older than G3, you need a Macintosh adapter.
Wrong or abnormal colors
If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
Connect the LCD display to another computer.
If you have an older graphics card, contact ViewSonic for a non-DDC
adapter.
Control buttons do not work
Press only one button at a time.
ViewSonic
VG510b/VG510s 13